Search
Close this search box.

43 F

43 F

Technical information

Single cylinder four stroke diesel engine, air cooled with direct injection system, save manual start with starting handle or electric starter motor, automatic excess fuel device, self-venting fuel system, mechanical governor, lubricating oil gear pump, oil filter, exhaust silencer, 7.5 l fuel tank, fuel filter, dry type air cleaner, crankcase of high tensile light alloy, crankshaft / con rod bearing: plain bearings on all except flywheel end (roller bearing), cast integral engine feet, power take of flywheel end, environmentally friendly by using internal crankcase breathing and valve stem seals, low profile due to horizontal configuration.

Standard scope of supply

7.5 l fuel tank, fuel filter, dry type air cleaner, exhaust silencer, operator`s manual.

Accessories

20 l fuel tank, electric starter motor, alternator, solenoid valve, oil pressure switch, engine temperature switch, fuel lift pump, anti-kickback starting handles, different flywheel housings, flanges and couplings, extended oil dip stick, deep oil pan, electronic speed control, EPA-certificate.

IFN-ISO

Blocked power output for intermittent loads.

ICFN-ISO

The standard rating for constant speed level and constant load level. For applications with continuous operation beyond the limits please contact the manufacturer

Derating

Derating 1% approx. every 100 m altitude and 2% approx. every 5°C above 20°C. Ratings certified within tolerance of 5% after running-in and operation with muffler and standard air cleaner.
Engine type 43 F
Configuration horizontal
Cylinders 1
Cooling air
Max. output (at 3600 rpm)
IFN-ISO
ICFN-ISO
kW (HP)
kW (HP)
11.0 (15.0) )
9.9 (13.5)
Max. speed
Max. torque
min-1
Nm (min-1)
3000
40.6 (2300)
Bore
Stroke
mm
mm
95
100
Displacement cm3 708
Mean piston speed m/s 10 / 3000
Compression ratio 19:1
Oil sump capacity l 2.1
Oil consumption g/kWh 1
Tank capacity l 7.5
Max. inclination permanent 15°
Dry weight kg 92
Scroll to Top
Scroll to Top